Maintaining different types of sinks

How to Clean a Quartz Sink

These sinks are made with quartz of course. The resistance to high temperatures make this one of the best options for your kitchen. You should not worry too much about the maintenance of these types of sinks.

Stoneware sinks are usually very rigid which gives it resistance to damage. Do not overdo it and clean your sink with a sponge, warm water and liquid soap. This cleaning should always be after use.

You have to do a more detailed cleaning periodically, using a specific cleaning product for this material that you can find in any supermarket. Do not clean with scouring pads or abrasive cleaners.

How to Clean a Marble Sink

The marble sink is widely used in homes. It is practically clean, does not need detailed maintenance. The facility to clean it makes it one of the most demanded for kitchens.

As we have indicated for other types of sinks, you need nothing more than a cloth, warm water and liquid soap. Stains may appear in your sink, but do not worry because we have the solution to this problem. Apply directly a drop of liquid soap and rub with a cloth moistening it in hot water to remove stains from your sink.

If the stains persist with this trick, we have an ace under the sleeve. Adhere some vinegar to the cloth and rub it with a little more force and the stains will disappear. After removing all stains, you should rinse the sink with lukewarm water and clean once again with a clean, dry cloth to remove any trace of dirt. How to clean a marble sink is so simple that you will in minutes.

How to Clean a Ceramic Sink

For cleaning this type of material you should not spend a lot of money. You will need a sponge and liquid soap to keep it in top condition. If you do not have liquid soap you can use some vinegar-based cleaning product. Either of these two options will give you the same result.

One of the most common oversights that occur in the kitchen is leaving metal utensils for several hours causing stains in your sink. To solve this problem, simply use ceramic glass cleaners that you can find at the nearest hardware store in the house.

If you want to keep your ceramic sink in perfect condition, avoid using abrasive products that will ruin the material. Do not use concentrated formula, which can cause irreparable damage to your sink.

How to Clean a Synthetic Resin Sink

If you have this type of sink you are probably very happy with it. This material is a good choice for your kitchen. The porosity is very little, managing to avoid the dust or dirt that come to have the other materials of manufacture.

Sink Cleaning Remedies

Cleaning is very simple, using liquid soap and water will leave your sink very clean. If you have lost a bit of brightness we tell you how to recover it. It is simple. With a dry cloth and a mixture of lime and hot water you will clean the sink. Moisten the cloth and wipe it all over your sink to give it shine. This blend helps remove scratches and remove stains difficult to remove with soap. If you do not have lime you can substitute with vinegar.

Bonus – Cleaning Kitchen Faucets

In order to effectively clean your faucet you simply follow the instructions given by the manufacturer. If it is stainless steel like one of theseĀ Then you will need a special kind of cleaner.


Toilet Problems

Leaks on the outside of the toilet can cause significant damage and leakage through the floor. The advantage in this case is that water losses are easily detected. Problems are sometimes recorded in the area that connects the bowl to the floor. Other times, the leaks have their origin in bad seals. In many of these cases, it is necessary to disassemble the toilet or cistern to perform repairs.

Problems with the toilet

In order to solve the problems of water loss in toilets, it is often necessary to remove the latter to replace the gasket and sometimes it is also necessary to remove the fixing screws and the cistern mechanism. It is necessary to take note of the brand of the tank to buy a kit with all the necessary elements for the repair.

The foam seal is then removed, which enables the water to be sealed between the toilet and the cistern, the edges of the orifice are cleaned to remove scale and the new mechanism is introduced into the cistern. From the outside, the PVC nut is placed in the thread and it locks to compress the joint. Finally, a new foam seal is installed on the nut and, again, the tank on the toilet.

Pipe gasket leaks

When leaks are spotted between the exhaust pipe and the toilet, it is necessary to disassemble the latter. To do this, shut off the water tap, empty the cistern and disconnect the water inlet pipe to the tank. It is then removed from the wall and the retaining brackets removed. To release the toilet from the floor, remove the screws that fix it to the floor. After unscrewing, carefully swing the toilet to loosen the adhesive that binds it to the floor.

When leaks are recorded between the evacuation tube and the toilet, the latter must be removed. Sometimes the solution is to replace the sealing gasket of the sleeve. In this case, after dismantling the toilet, remove the damaged seal and cut the adjusting ring with a metal saw.

If all else fails then you can always call a professional. They know the best practice and will always get the job done.